The damping hinge, also known as the buffer hydraulic hinge, is a hinge that uses hydraulic dampers and springs to achieve a buffer effect when closed.

Modern home furnishing has transitioned from the original hinge to the damping hinge in the selection of hardware accessories.

However, how does Tavor Damping Hinge stand out among similar products?

I will elaborate for you one by one below.

Comprehensive structure for excellence

Inheriting the German hinge design principle, the thickness of the steel plate is 1.0×1.0×1.1 (mm), professional anti-decoupling design, customized with six coil springs and six steel plates, load 6KG, fatigue test opening and closing 50,000 times The above can still be used normally, and the life of the hinge is as long as 10 years.

Soft and quiet cushioning effect

The dampers are all imported damping oil, which can withstand extreme cold and extreme heat. Taiwo's patented fast-slow damping technology enables gentle closing.

The effective damping stroke of

60° makes it quiet as usual even if it is closed hard.

Extraordinary anti-rust function

In the details that cannot be detected visually, the hinges are thickened as a whole and electroplated to 8μ, and there is a thin anti-rust coating, so that each hinge has no test after 48 hours of neutral salt spray test. Any rust spots.

Professional and meticulous packaging concept

Customize screws with special torque and thicker plating for you. Each hinge is guaranteed to be equipped with six screws, individually packaged, symmetrically arranged, and ten in a box.

Equipped with customized exquisite hinged cup head cover and exclusive hinged arm body cover.

Comprehensive inspection from the inside out

From appearance to function, from packaging to accessories, each hinge has undergone a comprehensive inspection of more than a dozen procedures, just to ensure that the products that go to your hands are 100% qualified.

Welcome to continue to pay attention to TAVAL customized silent hardware, your support is our driving force!